|
The W2N.net - Wikipedia |
Link Ads Questz World |
Stoneware a vitreous or semi-vitreous ceramic ware of fine texture made primarily from non-refractory fire clay.1
Contents |
Stoneware's maturation temperature ranges from about 1200 °C to 1315 °C (2192 °F to 2399 °F). In essence, it is man-made stone. One widely recognized definition is from the Combined Nomenclature of the European Communities, which states:
"Stoneware, which, though dense, impermeable and hard enough to resist scratching by a steel point, differs from porcelain because it is more opaque, and normally only partially vitrified. It may be vitreous or semi-vitreous. It is usually coloured grey or brownish because of impurities in the clay used for its manufacture, and is normally glazed."2
In contrast, earthenware is fired at lower temperatures and is not impervious to liquids. Porcelain, which some consider to be a type of stoneware, is distinguished as being whiter than stoneware and always vitreous. Kaolin, or china clay, has a lower content of impurities than many other clays. It is also fired to a vitreous state, transforming the constituent silica into glass. Some porcelain bodies are translucent after firing. Firing a piece of pottery to too high a temperature will result in warping or melting. Vitreous clay bodies can be made at different temperatures ranges, but they are typically fired in the stoneware/porcelain range. Fired stoneware absorbs up to 5% water, porcelain 0%, and earthenware up to 10%. Earthenware, when moist, is typically not freeze resistant.
Clay refers to group of minerals that generally exhibit plasticity when mixed with water, and which chemically primarily consist of alumina and silica. Potters refer to combinations of clays mixed with other materials as clay bodies. Different kinds of clay bodies are created by mixing additives, such as feldspar, grog, quartz, flint, many other minerals are used and these can include spodumene, wollastonite to modify clays. Clay bodies can thereby be formulated to fire at a range of temperatures. Darker clays often contain iron and other metal oxide impurities. The clay used for porcelain and white stoneware clay bodies contain very little of these impurities.
As a high-fired ceramic, stoneware is notably more difficult to produce than the earthenware and terra cotta readily seen in prehistory. However, it is only slightly less difficult to produce than porcelain, with the only essential difference being the material composition of the latter. For example, the off-white stoneware made in Siegburg, Germany beginning in the second quarter of the 14th century has a completely fused body with a very low porosity of 0.4%, predating the European replication of porcelain by only three centuries. In contrast, technology transfer of earthenware production from Mycenae and the Near East occurred many thousands of years before this.
The earliest example of stoneware is found in China, naturally as an extension of higher temperatures achieved from early development of reduction firing.3 From the various definitions of high-fired ceramics, it is agreed that the earliest stoneware is encountered in the late Shang dynasty in China, with large quantities in production by the Han dynasty.456
Glaze may be applied to stoneware pottery before a second firing at a different temperature, or a glaze may be applied before a single, raw firing. American Stoneware became the dominant houseware of nineteenth century America. Bartmann jugs, with applied moulded faces beneath their handles, were manufactured throughout the 16th and 17th centuries, especially in the Cologne region of Germany, notably nearby Frechen. These "beard man" jugs are often called long-beard, or Bellarmine referring to Robert Bellarmine.
The above article is licensed under the GNU Free Documentation License. It uses material from the copyrighted Wikipedia "Stoneware" article.